Skip to main content

WG-Easy Step-by-Step Guide

wireguard-icon-512x512-vapigtol.png

 

Setting up WG-Easy to manage your WireGuard VPN server is a simple process that requires a few steps using Docker. In this guide, we'll walk through the steps to get WG-Easy up and running, including detailed configurations, environment variables, and port forwarding requirements.

 

 

Step 1: Install Docker

 

Step 2: Enable IP Forwarding

What is Portforwarding?

What is Port Forwarding?

Port forwarding is a networking technique used to redirect traffic from an external IP address and port number to an internal IP address and port. It's commonly used to make services running on a private network (such as a home or corporate network) accessible to devices outside that network, such as the internet.

When a request is made to a specific port on a router’s external IP address (such as your home or business’s public IP address), the router forwards that request to the appropriate port on an internal server or device running the service. This is crucial for applications like web servers, game servers, or VPN services like WireGuard.

For instance, if you are running a WireGuard VPN server on your home network, you need to configure port forwarding so that VPN clients on the internet can connect to your server through the public IP address.

Example of Port Forwarding:

  • External IP: 203.0.113.5
  • External Port: 51820 (WireGuard VPN)
  • Internal IP: 192.168.1.10
  • Internal Port: 51820

With port forwarding enabled, any traffic coming to 203.0.113.5:51820 will be forwarded to 192.168.1.10:51820 on your local network, allowing the VPN clients to connect to your WireGuard server.

To allow VPN traffic to pass through your server, you need to enable IP forwarding on your host machine. Follow these steps:

  1. Open the system configuration file:

    sudo nano /etc/sysctl.conf
  2. Uncomment the line:
    net.ipv4.ip_forward=1

     

  3. Apply the changes:
    sudo sysctl -w net.ipv4.ip_forward=1

  4. Set up IP masquerading and forwarding rules with iptables:
    sudo iptables -t nat -A POSTROUTING -o eth0 -j MASQUERADE
sudo iptables -A FORWARD -i wg0 -o eth0 -j ACCEPT
sudo iptables -A FORWARD -i eth0 -o wg0 -m state --state RELATED,ESTABLISHED -j ACCEPT

 

Step 3: Configure WG-Easy with Docker Compose for Dockerswarm

To easily manage and maintain WG-Easy, we will use Docker Compose. Here’s a sample docker-compose.yml file that configures WG-Easy.
If you want to start the Container for Docker Standalone Engine then remove the deploy: block.

Create a docker-compose.yml file:

version: "3.8"
services:
  wg-easy:
    image: ghcr.io/wg-easy/wg-easy
    networks:
      - management_net  # Required for Traefik or Portainer access (Change this to your Network)
    deploy:
      mode: replicated
      replicas: 1
      labels:   # If you dont use Traefik, remove this whole labels block
        - 'traefik.enable=true'
        - 'traefik.http.services.wg-easy.loadbalancer.server.port=51821'
        - 'traefik.http.services.wg-easy.loadbalancer.server.port=51820'
    container_name: wg-easy
    volumes:
      - /path/to/wg-easy-data:/etc/wireguard  # Changed volume mount path
    ports:
      - "51820:51820/udp"
      - "51821:51821/tcp"  
    restart: unless-stopped
    environment:
      - WG_HOST=your-server-ip-or-domain
      - PASSWORD=your-web-ui-password
      - PORT=51821
      - WG_PORT=51820
      - UI_TRAFFIC_STATS=true
      - UI_CHART_TYPE=1
      - WG_ALLOWED_IPS=0.0.0.0/0
      - WG_DEFAULT_ADDRESS=10.8.0.x  # Client IP address range
      - WG_DEFAULT_DNS=1.1.1.1       # DNS server for VPN clients
      - WG_POST_UP=iptables -A FORWARD -i %i -j ACCEPT; iptables -t nat -A POSTROUTING -j MASQUERADE; iptables -A FORWARD -o %i -j ACCEPT
      - WG_POST_DOWN=iptables -D FORWARD -i %i -j ACCEPT; iptables -t nat -D POSTROUTING -j MASQUERADE; iptables -D FORWARD -o %i -j ACCEPT
    cap_add:
      - NET_ADMIN
      - SYS_MODULE
    sysctls:
      - net.ipv4.ip_forward=1
      - net.ipv4.conf.all.src_valid_mark=1
networks:
  management_net:
    external: true

Key Parameters

  • WG_HOST: The public IP address or domain name of your VPN server.
  • PASSWORD: The password for logging into the web interface.
  • WG_PORT: The WireGuard port (default 51820).
  • WG_DEFAULT_ADDRESS: The IP range that the VPN clients will use (default is 10.8.0.x).
  • WG_DEFAULT_DNS: The DNS server used by VPN clients (e.g., 1.1.1.1 or 8.8.8.8).

 

 

Step 4: Start WG-Easy

Now that you’ve created the Docker Compose file, start WG-Easy by the following command to deploy a stack:

docker stack deploy -c docker-compose.yml wg-easy

This command will deploy WG-Easy as a containerized service. The web UI will be available at http://your-server-ip:51821, and WireGuard will listen on port 51820 for incoming VPN connections.

Log in using the password you specified in the Docker Compose file. From the web UI, you can add new clients, view traffic statistics, and download client configurations.

 

Environment Variables and Configuration Options

Here’s a list of common environment variables that you can set in the Docker Compose file:

Env VariableDefaultDescription
WG_HOST-Public IP or domain of the VPN server
WG_PORT51820WireGuard's listening port
PASSWORD-Password for accessing the web UI
WG_DEFAULT_ADDRESS10.8.0.xIP range for VPN clients
WG_DEFAULT_DNS1.1.1.1DNS server for VPN clients
UI_TRAFFIC_STATSfalseEnable detailed RX/TX traffic stats
UI_CHART_TYPE1Type of chart to use in web UI (1 = line chart)
WG_ALLOWED_IPS0.0.0.0/0, ::/0IPs allowed for routing through the VPN
LANGenLanguage for the Web UI (supports multiple languages)
ENABLE_PROMETHEUS_METRICSfalseEnable Prometheus metrics for monitoring


 

Step 6: Port Forwarding

For external access, you need to set up port forwarding on your router or firewall. Forward the following ports:

  • 51820/udp: WireGuard VPN port.
  • 51821/tcp: WG-Easy Web UI port.

These ports allow external clients to connect to your VPN server and administrators to access the web interface.

If you dont know how to do that go visit this Website from NordVPN.

 

 

Conclusion

WG-Easy simplifies the process of managing a WireGuard VPN server. With features like an intuitive web UI, automatic client management, detailed traffic stats, and easy deployment using Docker, it’s an excellent solution for both beginners and advanced users alike. Whether you're setting up a personal VPN or managing one for your organization, WG-Easy provides all the tools needed for secure, efficient operation.

Back to top